Skip to main content

How do I clean my toy, and which lube should I use?

Keep your toy safe, hygienic and lasting longer.

Written by Leah H

Strokers and sleeves: Thrust, Thrust Sync and Pro

  1. Turn the toy off and unplug it.

  2. Remove the sleeve from the case (gently twist and pull).

  3. Wash the sleeve with warm water and a toy cleaner like Erojoy Fresh, or mild unscented soap.

  4. Rinse well so no soap is left.

  5. Pat dry with a lint-free cloth, then let it air-dry completely before putting it back.

  6. Wipe the case with a damp cloth. Don't put the motor end in water unless your manual says the toy is waterproof.

Vibrators: Pulse, Muse and Pebble

  1. Turn the toy off.

  2. Wash it with warm water and a toy cleaner like Erojoy Fresh, or mild unscented soap.

  3. Rinse well so no soap is left, then pat dry and let it air-dry completely.

  4. Muse is 100% waterproof. For Pulse and Pebble, keep the charging point dry unless your manual says the toy is waterproof.

For every toy, avoid alcohol, harsh detergents and scented soaps, as they can damage the material and irritate your skin.

Which lube?

Always use a water-based lube, like Erojoy Glide. Silicone-based and oil-based lubes damage the toy material over time and aren't covered by the warranty.

Putting the sleeve back (strokers)

Make sure everything is clean and dry. Squeeze the top of the sleeve to narrow it, line it up with the opening and push it in evenly until it's snug. On Thrust and Thrust Sync, push it all the way in, or the motor won't start.

Step-by-step guides by product

Find cleaning guides for Fap, Pro, Synflex and Thrust Sync at erojoy.com/pages/manuals.

Did this answer your question?